TRP-11
Product Datasheet
Zusätzliche Information
TRP-Übertragungsinterval
Sie sollten bedenken, dass wir das Sendeintervall nicht ändern können. In der Vergangenheit hatten wir diese Option, aber ein fester Wert führte zu Kollisionen, wenn wir mehrere Sender hatten.
Jetzt ist der Wert auf 8s festgelegt. Tatsächlich gibt es immer 2 Übertragungen innerhalb von 16s (durchschnittlich 8s).
Aber je nach Seriennummer kann sich das Übertragungsintervall ändern.
Lassen Sie mich das im Detail erklären
DEVICE A: Tx - [4s] - - Tx - - - - - - [12s] - - - - - - Tx - [4s] - - Tx - - - - - - - [12s] - - - - - - Tx
DEVICE B: Tx - - -[6s] - - - Tx - - - - - [10s] - - - - Tx - - -[6s] - - - Tx - - - - - [10s] - - - - - Tx
DEVICE C: Tx - - - -[8s] - - - - Tx - - - - [8s] - - - Tx - - - -[8s] - - - - Tx - - - - [8s] - - - - Tx
DEVICE B: Tx - - - - -[10s] - - - - - Tx - - - [6s] - - Tx - - - - -[10s] - - - - - Tx - - - [6s] - - - Tx
DEVICE E: Tx - - - - - -[12s] - - - - - - Tx - - [4s] - Tx - - - - - -[12s] - - - - - - Tx - - [4s] - - Tx
DEVICE F: Tx - - - [DELAY_A] - - - - Tx - - [DELAY_B] - Tx - - - [DELAY_A] - -- Tx - - [DELAY_B] - - - TxInnerhalb von 16 Sekunden gibt es immer 2 Mitteilungen.
DELAY_A + DELAY_B = 16s.
Aber der Wert von DELAY_A (und damit der Wert von DELAY_B) hängt von der Seriennummer des sendenden Gerätes ab.
Additional Information
TRP transmission interval (Original)
You should consider that we cannot modify the transmission interval. In the past we had this option but having a fixed value caused collision when we had several emitter.
Now the value is fixed at 8s. In fact you have always 2 transmission within 16s (average 8s)
But depending on the serial number, the transmission interval might change.
Let me explain it more in detailYou should consider that we cannot modify the transmission interval. In the past we had this option but having a fixed value caused collision when we had several emitter.
Now the value is fixed at 8s. In fact you have always 2 transmission within 16s (average 8s)
But depending on the serial number, the transmission interval might change.
Let me explain it more in detail
DEVICE A: Tx - [4s] - - Tx - - - - - - [12s] - - - - - - Tx - [4s] - - Tx - - - - - - - [12s] - - - - - - Tx
DEVICE B: Tx - - -[6s] - - - Tx - - - - - [10s] - - - - Tx - - -[6s] - - - Tx - - - - - [10s] - - - - - Tx
DEVICE C: Tx - - - -[8s] - - - - Tx - - - - [8s] - - - Tx - - - -[8s] - - - - Tx - - - - [8s] - - - - Tx
DEVICE B: Tx - - - - -[10s] - - - - - Tx - - - [6s] - - Tx - - - - -[10s] - - - - - Tx - - - [6s] - - - Tx
DEVICE E: Tx - - - - - -[12s] - - - - - - Tx - - [4s] - Tx - - - - - -[12s] - - - - - - Tx - - [4s] - - Tx
DEVICE F: Tx - - - [DELAY_A] - - - - Tx - - [DELAY_B] - Tx - - - [DELAY_A] - -- Tx - - [DELAY_B] - - - TxThere are always 2 communication within 16 seconds.
DELAY_A + DELAY_B = 16s.
But the value of DELAY_A (and thus the value of DELAY_B) depends on the serial number of the transmitting device.
Information supplémentaire
Intervalle de transmission TRP
Vous devez considérer que nous ne pouvons pas modifier l'intervalle de transmission. Dans le passé, nous avions cette option mais le fait d'avoir une valeur fixe provoquait des collisions lorsque nous avions plusieurs émetteurs.
Maintenant la valeur est fixée à 8s. En fait, vous avez toujours 2 transmissions dans les 16s (moyenne de 8s).
Mais en fonction du numéro de série, l'intervalle de transmission peut changer.
Laissez-moi l'expliquer plus en détail
DEVICE A: Tx - [4s] - - Tx - - - - - - [12s] - - - - - - Tx - [4s] - - Tx - - - - - - - [12s] - - - - - - Tx
DEVICE B: Tx - - -[6s] - - - Tx - - - - - [10s] - - - - Tx - - -[6s] - - - Tx - - - - - [10s] - - - - - Tx
DEVICE C: Tx - - - -[8s] - - - - Tx - - - - [8s] - - - Tx - - - -[8s] - - - - Tx - - - - [8s] - - - - Tx
DEVICE B: Tx - - - - -[10s] - - - - - Tx - - - [6s] - - Tx - - - - -[10s] - - - - - Tx - - - [6s] - - - Tx
DEVICE E: Tx - - - - - -[12s] - - - - - - Tx - - [4s] - Tx - - - - - -[12s] - - - - - - Tx - - [4s] - - Tx
DEVICE F: Tx - - - [DELAY_A] - - - - Tx - - [DELAY_B] - Tx - - - [DELAY_A] - -- Tx - - [DELAY_B] - - - TxIl y a toujours 2 communications dans un délai de 16 secondes.
DELAY_A + DELAY_B = 16s.
Mais la valeur de DELAY_A (et donc la valeur de DELAY_B) dépend du numéro de série de l'appareil émetteur.
Description of the LoRa message
Device Labels
Temperature
°C
temperature
telemetry
signed integer
Relative Humidity
°RH
humidity
telemetry
unsigned integer
Oxygen concentration
%
oxygen
telemetry
CO2 concentration
%
co2
telemetry
Second temperature
°C
temperature2
telemetry
signed integer
Pressure
mbar
pressure
telemetry
unsigned integer
analog channel #0
uA
analogCurrent0
telemetry
analog channel #1
uA
analogCurrent1
telemetry
analog channel #2
uA
analogCurrent2
telemetry
analog channel #3
uA
analogCurrent3
telemetry
digital inputs state
digitalInputsState
telemetry
relative pulse counter 0
relativePulseCounter0
telemetry
relative pulse counter 1
relativePulseCounter1
telemetry
relative pulse counter 2
relativePulseCounter2
telemetry
analog channel #0
mV
analogVoltage0
telemetry
analog channel #1
mV
analogVoltage1
telemetry
analog channel #2
mV
analogVoltage2
telemetry
analog channel #3
mV
analogVoltage3
telemetry
Power register
W
electricityMeterEnergy
telemetry
waterMeter
telemetry
Uncorrected volume index
m3
gasMeterVolume
telemetry
flowTemperature
telemetry
power
telemetry
Volume index
m3
heatMeterVolume
telemetry
Return flow temperature
°C
returnFlowTemperature
telemetry
Volume flow
m3/h
flowRate
telemetry
Main energy index
kWh
heatMeterEnergy
telemetry
Battery voltage
V
batteryVoltage
telemetry
Last updated