Strega Valve

http://www.stregatechnologies.com/products/wireless-smart-valve/

Product Datasheet & Tools

1+2 Cable through screw connection

3 Strip the cable and reinforce with solder

4 Insert the cable into the Wago terminal and check that it is seated correctly.

5 Plug the power cable into the valve head and fix it with the screw.

6 Connect the USB Cable into the USB Port and your computer

1 After the device is connected to USB, start the SV_SE_Reader programme and click on "Read Device".

2 click yes to sync the time

3 get the Device EUI

4 get the appEUI

5 get the appKEY

6 set the Join Mode to OTTA

7 check, if the device class is A (for battery mode)

All Downlinks shall be sent on Port 3

All informations about the Uplink and Downlink are in the Manuel above at the beginning.

Last updated 1 year ago